ToxiRAE Pro PID als persoonlijke draadloze monitor voor vluchtige organische verbindingen
Voor online documentatie en onder andere software bezoekt u de RAE Repository.
BELANGRIJKSTE KENMERKEN
- Draadloze toegang tot realtime instrumentmetingen en alarmstatus vanaf elke locatie
- Zeer duidelijke vijfvoudige draadloze notificatie van alarmomstandigheden, lokaal en op afstand
- Betrouwbaar, robuust en intrinsiek veilig
- Grootste afleesscherm in zijn klasse
- Continue datalogging
- Volledig geautomatiseerd bumptests en kalibratie met AutoRAE 2
- Door de gebruiker te vervangen sensor, filter, ventilator en lithium-ionbatterij
TOEPASSINGEN
- Olie en gas
- Chemische fabrieken
- Farmaceutische fabrieken
- Overheidsinstanties op het gebied van gezondheid, veiligheid, defensie en milieu
- HazMat-teams, first responders
- Milieutoepassingen
- Milieuadvies
- Grondsanering
PRODUCT SPECIFICATIES
Size | 4.6" H x 2.4" W x 1.2" D (118 x 60 x 30 mm) |
Weight | 8.29 oz. (235 g.) |
Sensor | Photoionization sensor with 10.6 eV (standard) or 9.8 eV2,3 (optional) lamp. Response time (T90) < 15 sec. (Isobutene). Field-replaceable sensor. Easy access to lamp for cleaning |
Detectable Gases | A wide variety of ionizable chemicals using 190 built-in and over 300 published correction factors |
Battery | Rechargeable Lithium-ion battery |
- Operating time: > 12 hours (normal operation) | |
- Recharge time: < 4 hours through charging cradle | |
Display | Graphical LCD display with white LED backlighting (activated when monitor is in alarm or with a button press) |
Display Readout | - Real-time reading of VOC concentrations in parts per million or mg/m3; battery status; data logging on/off; wireless on/off and reception quality |
- STEL, TWA, and peak values | |
- Calibration and measurement gases; correction factors | |
Keypad | 2 buttons for operation and programming |
Sampling | Internal fan |
Calibration | Automatic with AutoRAE 2 Test and Calibration Station2 or manual |
Alarm Modes | Wireless remote alarm notification1,2; audible (95 dB @ 30 cm), vibration, visible alarm (flashing bright red LEDs), and on-screen indication of alarm conditions |
- High alarm: 3 beeps and flashes per second | |
- Low alarm: 2 beeps and flashes per second | |
- STEL and TWA: 1 beep and flash per second | |
- Additional diagnostic alarm and display message for low battery and fan stall | |
Datalogging | - Continuous datalogging3 with a three-month capacity (at one-minute intervals) |
- User-configurable datalogging interval (from 1 to 3,600 seconds) | |
Communication and Data Download | - Data download and instrument set-up on PC via charging and PC comm. cradle |
- Data download via AutoRAE 2 Automated Test and Calibration Station2 | |
- Wireless data and status transmission1,2 via built-in RF modem (optional) | |
Wireless Network | RAE Systems Dedicated Wireless Network |
Wireless Frequency1,2 | ISM license-free bands |
Wireless Range1,2 (Typical) | 300 feet (100 meters) |
Operating Temperature | -4° to 131°F (-20° to 55°C) |
Humidity | 0% to 95% relative humidity (non-condensing) |
Dust and Water Resistance | IP-54 rating for dust and water ingress protection (validated by an independent test laboratory) |
Hazardous Location Approvals | US and Canada: Class I, Division 1, Groups A, B, C and D. T-code T4. Class I, Zone 0 A/Exia IIC T4 |
Europe: ATEX: II 1G, Ex ia IIC Ga T4. IECEx: Ex ia IIC Ga T4 | |
China: Ex ia IIC T4 | |
CE Compliance European Conformity) | EMC directive: 2004/108/EC. R&TTE directive: 1999/5/EC. ATEX directive: 94/9/EC |